Weld Output Terminals - Miller Trailblazer 325 Diesel Owner's Manual

5-6. Weld Output Terminals

1
OM-258900 Page 26
.
Complete Parts List available at www.MillerWelds.com
!
Stop engine.
!
Turn off power before con-
necting to weld output termi-
nals.
!
Do not use worn, damaged,
undersized, or repaired
cables.
1 Positive (+) Weld Output
Terminal
2 Stick Negative (−) Weld
Output Terminal
3 Wire/TIG/Gouge Negative (−)
Weld Output Terminal
For MIG welding, connect work
cable to Negative (−) terminal and
wire feeder cable to Positive (+)
terminal.
For Stick welding, connect work
cable to Negative (−) terminal and
electrode holder cable to Positive
(+) terminal.
For TIG welding, connect work
cable to Positive (+) terminal and
electrode holder cable to Negative
(−) terminal.
3 2
248 009 / 259 872