Table of Contents
Advertisement
MCA 35
Menu #EMISSION MEASUREMENTS
Generator
Function available Description
Generator name AUTO
PMIN
PMAX
7.3
Customising maintenance
0
2
4
6
8
E
1
TEMP.: _ _ _ _
2
1
D
2
bar
#
F
% $
AUTO
J
I
10 "
After Sales level - Menu #REVISION
Parameter
Adjustment range Description
TYPE
NO
MANU
AUTO
(1)
0 to 23
REVISION HOUR
2008 to 2099
(1)
REV. YEAR
(1)
1 to 12
REVIS. MONTH
1 to 31
(1)
REVISION DATE
(1) The parameter is only displayed if MANU is configured.
15/06/12 - 300022160-001-01
normal operation
Operating at minimum output
Operating at maximum output BOILER TEMP.
10
12
14
16
18
20
22
24
SUNDAY 11:45
!
:
<
STD
C002272-C-04
Factory setting
No message indicating that maintenance is necessary
Recommended setting
Signals that maintenance is necessary on the date selected. Set the date using the
parameters below.
a Not applicable. Do not select this setting.
Time at which the REVISION display appears
Year in which the REVISION display appears
Month in which the REVISION display appears
Day on which the REVISION display appears
Values displayed
BOILER TEMP.
CURRENT
WIND SPEED
BACK TEMP
BOILER TEMP.
CURRENT
WIND SPEED
BACK TEMP
CURRENT
WIND SPEED
BACK TEMP
7.3.1.
Maintenance message
The boiler incorporates a function that can be used to display a
maintenance message. To set the parameters for this function,
proceed as follows:
1. Access the "After Sales" level: Hold down the - key until
#PARAMETERS is displayed.
2. Select the menu #REVISION.
Turn the rotary button to scroll through the menus or
4
modify a value.
Press the rotary button to access the selected menu
4
or confirm a value modification.
¼ For a detailed explanation of menu browsing, refer
to the chapter: "Browsing in the menus", page 62
3. Set the following parameters:
7. Checking and maintenance
°C
µA
rpm
°C
°C
µA
rpm
°C
°C
µA
rpm
°C
95
Advertisement
Table of Contents
