Table of Contents
Advertisement
MCA 35
4"
0
2
4
6
8
E
1
2
MODE
1
D
2
bar
#
F
% $
AUTO
J
I
+
+
C002296-B-04
Menu #RESET
Choice of generator Parameter
GENERATOR
RESET TOTAL
15/06/12 - 300022160-001-01
10
12
14
16
18
20
22
24
SUNDAY 11:45
!
:
<
STD
EXCEPT PROG. Performs a parameter RESET but retains the timer programmes
PROG.
SENSOR SCU
ROOM SENSOR Performs a RESET of the room sensors connected
n Connecting VM iSystem in cascade
It is possible to assign VMs only as slaves. Proceed as follows:
1. Select VM NETWORK and press the rotary button to go to the
specific menu.
2. The screen displayed is used to select the numbers of the slave
VMs to be added to the network. Numbers 20 to 39 are dedicated
to the VMs. Turn the rotary button to scroll through the numbers
and press to confirm the number chosen. Press j to go back to
the previous list.
3. To remove a slave VM from the network, select DELETE VMIMER
VM}.
4. The screen displayed is used to select the numbers of the slave
VMs to be removed from the network. Turn the rotary button to
scroll through the numbers and press to remove the number
chosen. Press j to go back to the previous list.
5. Select NB. ELEMENTS.NETWORK. This screen summarises the
elements in the network recognised by the system. Press j to go
back to the previous list.
5.7.5.
Return to the factory settings
To reset the appliance, proceed as follows:
1. Press key C , > and j simultaneously for 4 seconds. The menu
#RESET is displayed.
2. Set the following parameters:
Description
Performs a TOTAL RESET of all parameters
Performs a RESET on the timer programmes but retains the parameters
Performs a RESET of the generator sensors connected
5. Commissioning
91
Advertisement
Table of Contents
