DeDietrich Innovens MCA 35 Installation And Service Manual page 75

MCA 35
Influence of the parameter setting CT.TEL on the I.TEL: contact
CT.TEL I.TEL:
CLOSE ANTIFR
0/1 A
0/1 B
0/1 A+B
0/1 C
0/1 A+C
0/1 B+C
0/1 A+B+C
0/1 DHW
0/1 A+DHW
0/1 B+DHW
0/1 A+B+DHW The mode selected on the circuits is active.
0/1 C+DHW
0/1 A+C+DHW The mode selected on the circuits is active.
0/1 B+C+DHW The mode selected on the circuits is active.
0/1 AUX
15/06/12 - 300022160-001-01
C contact closed
The antifreeze mode is active on all boiler circuits. The mode selected on the boiler is active.
The mode selected on the circuit is active.
The mode selected on the circuit is active.
The mode selected on the circuits is active.
The mode selected on the circuit is active.
The mode selected on the circuits is active.
The mode selected on the circuits is active.
The mode selected on the circuits is active.
The mode selected on the DHW circuit is active.
The mode selected on the circuits is active.
The mode selected on the circuits is active.
The mode selected on the circuits is active.
The MAUX outlet on the connection terminal
4
block is active.
The boiler operates at a set point temperature
4
equal to BOILER MAX.
C contact open
The antifreeze mode is active on the circuit
concerned.
The antifreeze mode is active on the circuit
concerned.
The antifreeze mode is active on the circuits
concerned.
The antifreeze mode is active on the circuit
concerned.
The antifreeze mode is active on the circuits
concerned.
The antifreeze mode is active on the circuits
concerned.
The antifreeze mode is active on the circuits
concerned.
The antifreeze mode is active for the DHW circuit.
The antifreeze mode is active on the circuits
concerned.
The antifreeze mode is active on the circuits
concerned.
The antifreeze mode is active on the circuits
concerned.
The antifreeze mode is active on the circuits
concerned.
The antifreeze mode is active on the circuits
concerned.
The antifreeze mode is active on the circuits
concerned.
The MAUX outlet on the connection terminal
4
block is not active.
The boiler operates with a set point
4
temperature as a function of the outside
temperature.
5. Commissioning
73