Table of Contents
Advertisement
D865 Short User Manual
Accepting calls
Using different audio devices
Handset: Pick up the handset.
Headset: Press
.
Speakerphone: Press Answer or
Automatically accepting calls
The default is off. Turning the function on for an identity (admin mode only): on the phone's web
interface click Identities, select the identity, and click SIP. Scroll down to Auto answer and click on
on the on/off toggle switch. With this setting, your phone will automatically accept incoming calls
when it is idle.
Calls will be accepted on speakerphone, and you will be alerted acoustically by a single long beep.
Press the headset key
To turn off the acoustic alert, click Preferences, then Audio. Scroll down to the Auto Answer
section and click the on/off toggle of Auto Answer Indication to off.
Active calls
Hold
One call on hold
Press Hold or
to put the ongoing call on hold. Held calls are indicated as follows:
•
By the text on the display.
•
By the slowly blinking line key.
•
By the slowly blinking call indication LED.
•
By the double beep when you put a call on hold.
You can now:
•
transfer the held call blindly or with prior announcement - see
"Transferring calls" on page 25.
•
receive and make calls and put other calls on hold.
Pick up the held call by pressing its line key or by pressing
while on hold, the call is terminated on your phone as well, and the LED indicators are turned off.
or
.
if you want calls to go to the headset.
again. If the other party hangs up
23
Using the Phone
Advertisement
Table of Contents
