2-5.1.4 Https - Vivotek AW-GEV-264A Series User Manual

2-5.1.4 HTTPs

This section shows you how to use HTTPS to securely access the Switch. HTTPS is a secure
communication protocol that combines authentication and data encryption to provide secure
encrypted communication via the browser.
Web Interface
To configure a HTTPS Configuration in the web interface:
1. Select "Enabled" in the Mode of
2. Select "Enabled" in the Automatic Redirect of
3. Click Apply.
Figure 3-5.1.5: The HTTPS Configuration
Parameter description:
Mode :

Indicates the HTTPS mode operation. Possible modes are:
Enabled: Enable HTTPS mode operation.
Disabled: Disable HTTPS mode operation.
Automatic Redirect :

Indicates the HTTPS redirect mode operation. Automatically redirect web browser to
HTTPS when HTTPS mode is enabled. Possible modes are:
Enabled: Enable HTTPS redirect mode operation.
Disabled: Disable HTTPS redirect mode operation.
User Manual rev. 1.2. Aug. 2015
Configuration.
HTTPS
Configuration.
HTTPS
44