Table of Contents
Advertisement
Buttons
These buttons are displayed on the NTP page:
Apply – Click to save changes.
Reset - Click to undo any changes made locally and revert to previously saved
values.
NTP:
Mode: Enable or disable the NTP time server function.
Server #: Enter the addresses of one or multiple time servers. The entry field
supports both domain name and IP address.
Note that the time zone setting in the Management Information\Time\Manual page should be properly
configured when you enable the NTP server setting.
7-3 VVTK
NVR & CMS
You can identify the system by configuring switch contact information, name, and location.
Web interface
To configure Surveillance VVTK NVR & CMS on the web interface:
1. Click Surveillance > Management > VVTK NVR & CMS.
2. Make configuration changes and click the Apply button.
Figure 7-3.1: Surveillance NVR & CMS
IMPORTANT:
local area network, and there are differences for these devices in terms of VLAN
configurations:
NVR and CMS stations can join multiple VLAN Groups.
1.
Each of the IP cameras and video encoders can join a single VLAN Group.
2.
Unmanaged devices refer to those protected by unknown root passwords, which
you do not have the access credentials.
User Manual rev. 1.2. Aug. 2015
The surveillance switch automatically discovers all devices in the
300
Advertisement
Table of Contents
