7-6.2 Config Import - Vivotek AW-GEV-264A Series User Manual

7-6.2 Config Import

Web interface
To configure Camera config. in the web interface:
1. Click Surveillance > Management > Camera & Encoder > Camera Configure > Config
Import.
2. Select the Device to import the configuration file from (i.e., client PC or the switch itself).
3. Select the IP camera to load the configuration file to, using a single-click on its checkbox.
4. Click the Apply button.
Figure 7-6.2: Config import
User Manual rev. 1.2. Aug. 2015
307