Table of Contents
Advertisement
Chapter 11
11-1
Device Status
In this page, you can troubleshoot the connection between PoE switch and IP Devices. This
feature is designed primarily for administrators to verify and test the link routes between the
switch and the IP device. Note that the topology of network needs to be saved for this function
to work properly.
Web interface
To configure Surveillance Information in the web interface:
1. Click Surveillance > Diagnostics > and Device Status.
2. Select a device's checkbox and click the Start button to start the connectivity test.
3. Click Another Try to go back to the Device Status screen.
Figure 11-1.1: Device Status
User Manual rev. 1.2. Aug. 2015
Surveillance - Diagnostics
333
Advertisement
Table of Contents
