Factory Defaults - Vivotek AW-GEV-264A Series User Manual

6-2 Factory Defaults

This section describes how to reset the Switch configuration to Factory Defaults. Any
configuration files or scripts will recover to factory default values.
Web Interface
To configure a Factory Defaults Configuration in the web interface:
1. Chick Factory Defaults.
2. Click Yes.
Figure 6-2.1: The Factory Defaults
Parameter description:
Buttons:

Yes – Click to "Yes" button to reset the configuration to Factory Defaults.
No - Click to to return to the Port State page without resetting the configuration.
User Manual rev. 1.2. Aug. 2015
284