Table of Contents
Advertisement
7-4 VVTK
Camera & Encoder
This page displays the status of all IP Cameras and video servers currently connected to your
switch as well as all the devices in the network that the switch can access.
Web interface
To configure Surveillance Camera & Encoder in the web interface:
1. Click Surveillance > Management > Camera & Encoder > Device List.
2. Click
to configure the Batch Account Setting web page for a common user name
and password for multiple managed devices.
3. Click on a device's MAC address to configure the General Network setting.
4. Click the Apply button for the configuration to take effect.
5. A click on the IP address opens a web console with the IP camera (or video server).
Figure 7-4.1: Surveillance Camera & Encoder
User Manual rev. 1.2. Aug. 2015
302
Advertisement
Table of Contents
