Chapter 6 Switch- Maintenance; Restart Device - Vivotek AW-GEV-264A Series User Manual

Chapter 6
This chapter describes the entire switch Maintenance configuration tasks to enhance
the performance of local network including Restart Device, Firmware upgrade,
Save/Restore, Import/Export.

6-1 Restart Device

This section describes how to restart switch for any maintenance needs. Any configuration
files or scripts that you saved in the switch should still be available afterwards.
Web Interface
To configure a Restart Device Configuration in the web interface:
1. Chick Restart Device.
2. Click Yes.
Figure 6-1: Restart Device
Parameter description:
Restart Device :

You can restart the switch on this page. After restart, the switch will boot normally.
Buttons:

Yes – Click to "Yes" then the device will restart.
No - Click to undo any restart action.
User Manual rev. 1.2. Aug. 2015
Switch- Maintenance
283