Lacp; 4-6.1 System Status - Vivotek AW-GEV-264A Series User Manual

4-6 LACP

4-6.1 System Status

This section describes that when you complete to set LACP function on the switch then it
provides a status overview for all LACP instances
Web Interface
To display the LACP System status in the web interface:
1. Click Monitor, LACP, System Status
Checked "Auto-refresh".
2.
Click " Refresh" to refresh the port detailed statistics.
3.
Figure 4-6.1 The LACP System Status
Parameter description:
Aggr ID :

The Aggregation ID associated with this aggregation instance. For LLAG the id is
shown as 'isid: aggr-id' and for GLAGs as 'aggr-id'
Partner System ID :

The system ID (MAC address) of the aggregation partner.
Partner Key :

The Key that the partner has assigned to this aggregation ID.
Last changed :

The time since this aggregation changed.
Local Ports :

Shows which ports are a part of this aggregation for this switch. The format is:
"Switch ID:Port".
Buttons

Auto-refresh: Check this box to refresh the page automatically. Automatic
refresh occurs every 3 seconds.
Refresh: Click to refresh the page.
User Manual rev. 1.2. Aug. 2015
239