Poe - Vivotek AW-GEV-264A Series User Manual

4-11 PoE

This page allows the user to inspect the current status for all PoE ports.
Web Interface
To Display ECE Statistics in the web interface:
1. Click Monitor, PoE
Checked "Auto-refresh".
2.
Click " Refresh" to refresh the port detailed statistics.
3.
Figure 4-11.2: The PoE Statistics
Parameter description:
Local Port

This is the logical port number for this row.
PD Class

Each PD is classified according to a class that defines the maximum power the PD will use.
The PD Class shows the PDs class.
Five Classes are defined:
Class 0: Max. power 15.4 W
Class 1: Max. power 4.0 W
Class 2: Max. power 7.0 W
Class 3: Max. power 15.4 W
Class 4: Max. power 30.0 W
Power Requested

The Power Requested shows the requested amount of power the PD wants to be reserved.
Power Allocated

The Power Allocated shows the amount of power the switch has allocated for the PD.
Power Used

The Power Used shows how much power the PD currently is using.
Current Used

The Power Used shows how much current the PD currently is using.
Priority

The Priority shows the port's priority configured by the user.
Port Status

The Port Status shows the port's status. The status can be one of the following values:
PoE not available - No PoE chip found - PoE not supported for the port.
User Manual rev. 1.2. Aug. 2015
263