7-8.1 Nvr & Cms; 7-8.2 Camera & Encoder - Vivotek AW-GEV-264A Series User Manual

7-8.1 NVR & CMS
Web interface
To configure Surveillance IP Device > NVR & CMS on the web interface:
4. Click Surveillance > Management > IP Devices > NVR & CMS.
5. Make configuration changes and click the Apply button.
Figure 7-8.1: NVR & CMS Device List
Parameter description:
Remove:

Select the checkbox and click Apply to remove an off-Line device from the list. An
online device cannot be removed.
Status:

Device link state (On/Off Line).
Device Name:

NVR & CMS device name.
Edit Device Type:

Manual modification to Un-Managed, NVR & CMS, Camera & Encoder or Other
Device) into different IP Device or Un-managed Devices page.
MAC:

NVR & CMS device MAC address.
IP Address:

NVR & CMS device IP address. It is also a hyper-link that directly opens a web
session with the device.
Note that if the Auto-refresh checkbox is selected, the device status is refreshed
by every 3 seconds. If you want to Remove a detected device, deselect the
Auto-refresh checkbox first.
7-8.2 Camera & Encoder
User Manual rev. 1.2. Aug. 2015
309