Table of Contents
Advertisement
Apply – Click to save changes.
Reset - Click to undo any changes made locally and revert to previously saved
values.
3-1.4 Time
The switch provides manual and automatic ways to set the system time via NTP. Manual
setting is simple and you just input "Year", "Month", "Day", "Hour" and "Minute" within the valid
value range indicated in each item.
Web Interface
To configure Time in the web interface:
1. Click Configuration, System and Time
2. Specify the Time parameter.
3. Click Apply.
Figure 3-1.4: The time configuration
User Manual rev. 1.2. Aug. 2015
22
Advertisement
Table of Contents
