Grouping - Vivotek AW-GEV-264A Series User Manual

9-2

Grouping

Note the following with the Grouping (VLAN) configuration:
3. VLAN ID #1 is the default for all Ethernet ports on the PoE switch.
4. Enter a number ranging from 2 ~ 4095 as the VLAN ID.
5. The configuration aims to simplify the process of VLAN settings. The program will
automatically configure spanning tree, loopback detection, and other associated
settings in the background.
Web interface
To configure Surveillance Grouping in the web interface:
1. Click Surveillance, Management, and Grouping.
2. Click on the Add
3. Click the Apply button.
Figure 9-2.1: Surveillance Grouping
User Manual rev. 1.2. Aug. 2015
button. Refer to the discussion below for configuration details.
329