Table of Contents
Advertisement
7-6
Camera Configure
7-6.1 Config Export
Web interface
To configure Surveillance Information in the web interface:
1. Click Surveillance > Management > Camera & Encoder > Config Export
2. Select the Device to export the configuration file from. You can export IP cameras'
configuration profile (128KB in size) to the client computer or to the switch itself. Note that
if you choose to export to the switch, you can store up to 39 copies of camera
configuration profile.
The Search box supports filtering find of devices using Model Name, MAC address, or IP
addresses.
IMPORTANT: If you need to export the configuration to a client computer, a TFTP server
is required in your network. The configuration profile is transported via a TFTP server.
3. Click Start.
Figure 7-6.1: Config Export
User Manual rev. 1.2. Aug. 2015
306
Advertisement
Table of Contents
