Table of Contents
Advertisement
Chapter 9
9-1
Security
The MAC Lock function places an access control on client computers. Only the computers
listed with its MAC addresses can access the PoE switch and make configuration changes.
When the MAC Lock is enabled, all devices added to the switch will require that you manually
add their MAC addresses to the list.
This feature is automatically synchronized to all subordinate PoE switches in the network.
Configuration is necessary on the root switch only.
Web interface
To configure the Security function:
1. Click Surveillance > Surveillance Network > Security.
2. Select "Enable" in MAC Lock.
3. Specify the MAC address of the client computer or newly-added devices in the MAC add
field.
4. Click Apply and Add.
Figure 9-1.1: Security
User Manual rev. 1.2. Aug. 2015
Surveillance - Network
328
Advertisement
Table of Contents
