Table of Contents
Advertisement
7-6.3 Config Files
Web interface
To display configuration files currently stored on the switch:
1. Click Surveillance > Management > Camera & Encoder > Camera Configure > Config File.
2. You can select configuration files and delete these files by selecting their checkboxes, and
click the Delete button. Or you may download the configuration file to the client PC using
the Download button.
3. You can also export the files to a TFTP server by entering the TFTP address, checking the
files to be uploaded, and click the Export To button.
IMPORTANT: If you need to export the configuration to a client computer, a TFTP server is
required in your network. The configuration file is transported via a TFTP server.
Figure 7-6.3: Config File
7-7 VVTK Switch
VIVOTEK's surveillance switches discovered from your network will be listed here. Note that you
cannot remove a surveillance switch if it has been configured into a network configuration, e.g., a
VLAN. The online switches' IP addresses are hyperlinks. You can open a web console with them using
a single click.
In the Search box, Model Name, MAC address, and IP address can be used as the search
condition.
7-8 IP Device
This IP device page come from user manual managed device list, it provide a easy way to modify
device type (e.g., Un-Managed, NVR & CMS, Camera & Encoder or Other Device)
User Manual rev. 1.2. Aug. 2015
308
Advertisement
Table of Contents
