Table of Contents
Advertisement
Switching the SD cards
When both card slots are inserted with SD cards,
you can use the [SLOT SELECT] button to switch
the card to use.
When the memory on an SD card is full during
recording, data recording automatically switches to
the other card.
Memo :
The [SLOT SELECT] button is disabled during
0
recording or playback. Cards will not be
switched even if you press the button.
Formatting (Initializing) SD Cards
When the following cards are inserted, [!FORMAT]
appears at the remaining media display area.
Format the card using the camera recorder menu.
Unformatted SD cards
0
SD cards formatted under different
0
specifications
* For details of the menu operation, refer to "[Basic
Operations in Menu Screen] P 103".
Caution :
Be sure to format the SD card on this camera
0
recorder. SD cards formatted on a PC and other
peripheral equipment cannot be used on this
camera recorder.
[!RESTORE] appears at the remaining media
0
display area when an SD card that requires
restoring is inserted.
1 Select [System] B [Media] B [Format
Media].
(A P130 [ Format Media ] )
2 Select the slot of the SD card to be
formatted and press the Set button (R).
Format Media
Format Slot
Format Slot
3 The status of the selected SD card appears.
4 Select [Format] and press the Set button
(R).
Format Media
Format
Cancel
5 Formatting starts.
Formatting...
2
Set
4
Set
SD Card
45
Advertisement
Table of Contents
