Registering/Deleting Preset Zoom - JVC GY-HM660U Instruction

Registering/Deleting Preset Zoom

Registering Preset Zoom
You can register any 3 zoom positions.
1 Set to the Register Preset Zoom mode.
Tap (click) the [Preset] button to switch to the
Register Preset Zoom mode.
HM660 HM660
26min 26min
50min 50min
STBY STBY
282min 282min
.
2 Determine the zoom position.
Use the zoom control to operate the zoom and
determine a position.
3 Tap (click) [A].
Position [A] is registered, and position A is
displayed on the sliding bar of the zoom control.
HM660 HM660
26min 26min
50min 50min
STBY STBY
282min 282min
.
01:12 12:54 54.19 19
Z 00 Z 00
01:12 12:54 54.19 19
Z 00 Z 00
4 In the same way, register [B] and [C].
After all three positions A, B and C are
registered, the positions of the [A], [B], and [C]
buttons will be rearranged according to the
order of the registered zoom position from the
left.
HM660 HM660
26min 26min
50min 50min
STBY STBY
282min 282min
.
5 Exit the Register Preset Zoom mode.
Tap (click) the [Preset] button to exit the
Register Preset Zoom mode.
Memo :
After registration is complete ([A], [B], and [C]
0
buttons are all active), tapping (clicking) each
button switches to the corresponding preset
zoom position.
This function operates independently of the
0
preset zoom position on the camera recorder.
(A P49 [Saving/Recalling Current Zoom
Position (Preset Zoom)] )
01:12 12:54 54.19 19
Z 00 Z 00
167