Table of Contents
Advertisement
External synchronization of the camera unit while an external lock is active
While an external lock is active, the genlock is activated on the camera unit by the reference video signal input to the <GENLOCK IN/VIDEO OUT>
terminal.
@
NOTE
t To externally lock multiple units with the camera as the master device, set to the same setting as on the camera. Note that in a system using a mixture
of interlaced and progressive scanning, the continuity of the video and time codes is not guaranteed.
t When the external lock is applied to 24PN Native, be sure to input non-drop frame time code. External lock is not available in drop frame. Also, at the
moment external lock is applied, the image may look corrupted. This is an operation to match the 5-frame cycle and is not a malfunction.
Supplying the time code externally
You can supply the output time codes to a VTR or other recording device from the camera by matching the camera images or the replayed images.
1
Set [VIDEO OUT] in the main menu → [OUTPUT SEL] → [TC OUTPUT REF].
2
Set [HD SDI] or [COMPOSITE] in the main menu → [OTHER FUNCTIONS] → [GL PHASE] to match the supplied video output.
3
Set [TCG/TCR] in the main menu → [OUTPUT SEL] → [TC OUT].
@
NOTE
t If you set [TC OUTPUT REF] to [VIDEO OUT] in the main menu → [OUTPUT SEL], the input time code will be output to match the video output delay.
Connecting and setting the genlock and time code input/output
The relationship of the connecting and settings between the genlock and time code input/output is shown in the table.
When the genlock input and the camera output phase match, l is displayed, and when they do not match, × is displayed.
r When the camera recording format is 1080P, 1080i
Camera usage conditions
Camera settings
Genlock input and camera
output phase
r When the camera recording format is 720P
Camera usage conditions
Camera settings
Genlock input and camera
output phase
r When the camera recording format is 480i/576i
Camera usage conditions
Camera settings
Chapter 4 Shooting — Setting the time data
<GENLOCK IN/VIDEO OUT> terminal or <SDI OUT> terminal
<TC IN/OUT> terminal
Image and standard signals
supplied externally
Genlock input
[GL PHASE]
SDI output (HD)
Video output and SDI output
(SD)
Time code output
Image and standard signals
supplied externally
Genlock input
[GL PHASE]
SDI output (HD)
Video output and SDI output
(SD)
Time code output
Image and standard signals
supplied externally
Genlock input
[GL PHASE]
SDI
VIDEO
1080i
[HD SDI]
[COMPOSITE]
90H advance
l
90H delay
l
l
l
SDI
VIDEO
720P
[HD SDI]
[COMPOSITE]
120H advance
l
120H delay
l
×
×
SDI
– 95 –
VIDEO IN terminal
SDI IN terminal
HD SDI IN terminal
VTR, etc.
TC IN terminal
SDI
SD (480i/576i)
[HD SDI]
l
90H delay
l
SDI
SD (480i/576i)
[HD SDI]
l
120H delay
l
VIDEO
SD (480i/576i)
Disabled
VIDEO
[COMPOSITE]
90H advance
l
l
VIDEO
[COMPOSITE]
120H advance
l
l
Advertisement
Table of Contents
