Table of Contents
Advertisement
Attaching and removing the battery
Attaching
1
Insert the battery until you hear it clicks.
Removing
1
Turn the power switch to <OFF> while holding down the lock release button.
Make sure that the LCD monitor has gone off.
2
Lift up and remove the battery while holding down the battery release button.
Support the battery with your hand so that it does not fall down.
Using the AC adaptor
Attaching
1
Connect an AC cable.
Connect in the order shown in the figure.
Chapter 3 Preparation — Power supply
Lock release button
Power switch
Battery release button
<DC IN 12V> terminal
– 26 –
To the power outlet
(1)
(2)
Advertisement
Table of Contents
