Table of Contents
Advertisement
Chapter 3 Preparation — Tally lamp
Tally lamp
If set to anything other than [OFF] in the main menu → [OTHER FUNCTIONS] → [TALLY LAMP], you can make up the tally lamp light while
photographing.
Also, the tally lamp will flash when the following situations occur:
f When the remaining capacity of the battery is exhausted (four times per second)
f The P2 card has less free space to record and the battery level is low (one time per second)
f The P2 card has been removed while being accessed (four times per second)
f The P2 card has no more space to record (four times per second)
f When the warnings such as the fluctuation of the reference signal for the <GENLOCK IN/VIDEO OUT> terminal and a system error or recording
abnormality warning are displayed (four times per second)
Front tally lamp
Rear tally lamp
– 41 –
Advertisement
Table of Contents
