Table of Contents
Advertisement
[SW MODE]
Configure the settings of each mode when switched using each switch.
These menu items cannot be set when the thumbnail screen is displayed.
Item
[LOW GAIN]
[MID GAIN]
[HIGH GAIN]
[SUPER GAIN]
[OIS]
[ATW]
[ATW SPEED]
[ATW TARGET R]
[ATW TARGET B]
[W.BAL PRESET]
[W.BAL VAR]
[H.ZOOM SPEED]
[PUSH AF MODE]
[MF ASSIST]
[FOCUS ASSIST MODE]
[MACRO]
[MACRO MODE]
Chapter 6 Menu Operations — Menu list
Sets the gain value to be assigned to the <L> position of the <GAIN> switch. (Negative value of gain is
only in [HIGH SENS.] mode.)
[−3dB]...[18dB]
f Factory setting: [0dB]
Sets the gain value to be assigned to the <M> position of the <GAIN> switch. (Negative value of gain is
only in [HIGH SENS.] mode.)
[−3dB]...[18dB]
f Factory setting: [6dB]
Sets the gain value to be assigned to the <H> position of the <GAIN> switch. (Negative value of gain is
only in [HIGH SENS.] mode.)
[−3dB]...[18dB]
f Factory setting: [12dB]
Sets the super gain to be assigned to the USER button.
[24dB], [30dB], [36dB]
[ALL]: Each time the USER button is pressed, the camera toggles [24dB] → [30dB] → [36dB] → (off) in
order.
f Factory setting: [36dB]
Enables/disables the image stabilizer function.
[ON]: Enables the image stabilizer function.
[OFF]: Disables the image stabilizer function.
f Factory setting: [ON]
If functions are assigned to the USER buttons, switches [ON]/[OFF] using the USER button operations.
Assigns the auto tracking white balance function to the <WHITE BAL> switch.
[Ach], [Bch], [PRE], [OFF]
f Factory setting: [OFF]
Sets the control speed of the auto tracking white balance function.
[FAST], [NORMAL], [SLOW]
f Factory setting: [NORMAL]
Finely adjusts the Rch output for convergence with auto tracking white balance operation.
[−10]...[10]
f Factory setting: [0]
Finely adjusts the Bch output for convergence with auto tracking white balance operation.
[−10]...[10]
f Factory setting: [0]
Sets the color temperature to be assigned to the <PRST> position of the <WHITE BAL> switch.
[3200K], [5600K], [VAR]
f Factory setting: [3200K]
Sets the value of [VAR] in [W.BAL PRESET].
It can also be operated by the <SEL/PUSH SET> dial button.
Enabled when [W.BAL PRESET] is set to [VAR] and the <WHITE BAL> switch is at <PRST>.
[2000K]...[15000K]
f Factory setting: [3200K]
Sets the zoom speed when the HANDLE ZOOM switch is <FIX>.
[1]...[99]
f Factory setting: [50]
Assigns the operation mode when the <PUSH AUTO> button is pressed.
[TURBO]: Performs high-speed focusing automatically until the image is focused, once the button is
pressed.
[NORMAL]: Performs automatic focusing while pressing the button.
f Factory setting: [TURBO]
Sets whether to adjust the last focus automatically when in the manual focus mode.
[ON]: Adjusts the last focus automatically.
[OFF]: Does not adjust the focus automatically.
f Factory setting: [OFF]
If the image is largely out of focus, the focus may not be adjusted properly.
Operations with a remote control connected to the <CAM REMOTE> terminal are not available.
Sets the operation mode of the focus assist function.
[EXPAND]: Expands the center part of the screen of the LCD monitor.
[IN RED]: Outlines the contour of the video in red.
f Factory setting: [EXPAND]
If functions are assigned to the USER buttons, on and off of the function can be switched using the USER
button operations.
Enables/disables the focus macro function.
[ON]: Enables the focus macro function.
[OFF]: Disables the focus macro function.
f Factory setting: [ON]
If functions are assigned to the USER buttons, switches [ON]/[OFF] using the USER button operations.
Sets the operation mode when the focus macro function is enabled.
[TELE OFF]: Does not use the tele macro area.
[ALL OFF]: Does not use all of the macro area.
f Factory setting: [TELE OFF]
– 125 –
Description of settings
Advertisement
Table of Contents
