Table of Contents
Advertisement
Menu list
[SCENE FILE]
Configure the settings regarding scene files.
This menu is used to set fine image quality settings of the camera images, select scene files, and read/write scene file data to the internal memory.
These menu items cannot be set when the thumbnail screen is displayed.
Item
[FILE SELECT]
[NAME EDIT]
[LOAD/SAVE/INITIALIZE]
[VFR]
[FRAME RATE]
[SYNC SCAN TYPE]
[SYNCHRO SCAN]
[MASTER DTL]
[DTL CORING]
[DETAIL SETTING]
[DETAIL]
[V.DTL LEVEL]
[H.DTL FREQ.]
[V. DTL FREQ.]
[LEVEL DEPEND.]
[KNEE APE LVL]
[DTL GAIN(+)]
[DTL GAIN(−)]
Chapter 6 Menu Operations — Menu list
Selects the scene file (1 to 6).
[F1:], [F2:FLUO.], [F3:SPARK], [F4:B-STR], [F5:CINE V], [F6:CINE D]
f Factory setting: [F1:]
Edits the name of the scene file selected in the scene file menu. (Maximum of six characters)
Loads/saves/initializes the setting values allocated on the current scene file number (any one from 1 to 6).
[LOAD]: Selects and loads a scene file saved in the camera memory.
[SAVE]: Specifies a title and file number for the current setting values and saves them as a scene file in
the camera memory.
[INITIALIZE]: Initializes the selected scene files (1 to 6) to the factory settings.
Sets permission/prohibition of the variable frame rate (VFR).
[ON], [OFF]
f Factory setting: [OFF]
Switches the shooting interval and exposure time when [VFR] is [ON].
When [SYSTEM MODE] = 59.94 Hz:
[60fps], [54fps], [48fps], [44fps], [40fps], [36fps], [34fps], [32fps], [30fps], [28fps], [27fps], [26fps],
[25fps], [24fps], [22fps], [21fps], [20fps], [18fps], [15fps], [12fps], [9fps], [6fps], [4fps], [2fps], [1fps]
When [SYSTEM MODE] = 50 Hz:
[50fps], [48fps], [45fps], [42fps], [37fps], [34fps], [32fps], [30fps], [28fps], [27fps], [26fps], [25fps],
[24fps], [23fps], [22fps], [21fps], [20fps], [18fps], [15fps], [12fps], [9fps], [6fps], [4fps], [2fps], [1fps]
f Factory setting: [30fps] (when [SYSTEM MODE] = 59.94 Hz), [25fps] (when [SYSTEM MODE] = 50 Hz)
Switches the synchro scan display settings.
[sec]: Displays in time.
[deg]: Displays at shutter open angle.
f Factory setting: [sec]
Displays the speed of the synchro scan shutter that is used when shooting video for television etc.
When [SYNC SCAN TYPE] = [sec], and [SYSTEM MODE] = 59.94 Hz:
f 60i/60p: [1/60.0]...[1/249.8]
f 30P: [1/30.0]...[1/249.8]
f 24P: [1/24.0]...[1/249.8]
When [SYNC SCAN TYPE] = [sec], and [SYSTEM MODE] = 50 Hz:
f 50i/50P: [1/50.0]...[1/250.0]
f 25P: [1/25.0]...[1/250.0]
When [SYNC SCAN TYPE] = [deg] (in 0.5 d steps, angle display): [3.0d]...[360.0d]
f Factory setting: [1/60.0] (when [SYNC SCAN TYPE] = [sec], and [SYSTEM MODE] = 59.94 Hz)
Sets the level of the detail effect of the whole part.
[−31]...[31]
f Factory setting: [0]
Sets the level of signal (including noise) that does not activate the detail effect.
[0]...[60]
f Factory setting: [1]
Sets [ON]/[OFF] of the detail function.
[ON], [OFF]
f Factory setting: [ON]
Sets the intensity of the detail level in the vertical direction.
[−7]...[7]
f Factory setting: [0]
Sets the thickness of the detail level in the horizontal direction.
[−7]...[7]
f Factory setting: [0]
Sets the thickness of the detail level in the vertical direction.
[0]...[2]
f Factory setting: [1]
When the detail of luminosity signal is emphasized, details in the darker parts are compressed.
Details of bright areas are also compressed more when the value set for [LEVEL DEPEND.] is larger.
[−7]...[7]
f Factory setting: [0]
Sets the detail level of high luminosity areas (high-brightness areas).
[0]...[5]
f Factory setting: [2]
Sets the detail level of + direction (to make brighter).
[−31]...[31]
f Factory setting: [0]
Sets the detail level of − direction (to make darker).
[−31]...[31]
f Factory setting: [0]
– 118 –
Description of settings
Advertisement
Table of Contents
