Table of Contents
Advertisement
Maintenance
Charging the built-in battery
The camera uses the built-in battery to remember the date and time.
If
appears on the viewfinder or LCD monitor, the built-in battery is running out. Charge the built-in battery by the following procedure.
1
Make sure that the power switch is <OFF>.
2
Connect the AC adaptor to the camera.
For details on the connection of AC adaptor, refer to "Using the AC adaptor" (page 26).
3
Leave the camera for approx. four hours.
The built-in battery will be charged.
After charging completes, set the date and time and check the time code.
If
is still displayed after charging, the built-in battery needs to be replaced. Consult your dealer.
Chapter 10 Maintenance and Inspection — Maintenance
– 173 –
Advertisement
Table of Contents
