Table of Contents
Advertisement
Dual codec recording
Recording in different formats for main recording and sub recording can be performed on the camera.
For sub recording, you can select HD proxy in AVC-LongG 6 format with 1920×1080 resolution or one of three SD proxies with different resolution.
The file format is MOV that is suitable for nonlinear editing.
For the combination with the main recording, refer to "System modes and recording functions" (page 73).
Dual codec recording setting
Setting menu
When recording proxy data with the camera, set in the main menu → [RECORDING SETUP] → [DUAL CODEC SETTING].
Item
[REC MEDIA]
[PROXY MODE]
[PROXY DISP]
f For details on relations between dual codec recording and system mode, refer to "System modes and recording functions" (page 73).
f When recording proxy data, set [SPLIT] in the main menu → [RECORDING SETUP] → [FILE SPLIT].
Checking the setting status
Push the <DISP/MODE CHK> switch on the camera towards the <CHK> side twice to check the menu values of [REC MEDIA] and [PROXY MODE]
with the mode check function.
Recording modes and recording signals (video/audio)
The following settings are available only when [1080-59.94i] or [1080-50i] is set in the main menu → [SYSTEM MODE] → [LINE&FREQ].
r Video
Recording mode
File format
[AVC-G6 2CH
MOV
MOV]
[SHQ 2CH MOV]
MOV
[HQ 2CH MOV]
MOV
[LOW 2CH MOV]
MOV
r Audio
Recording mode
File format
[AVC-G6 2CH
MOV
MOV]
[SHQ 2CH MOV]
MOV
[HQ 2CH MOV]
MOV
[LOW 2CH MOV]
MOV
Recording the proxy data
Select [P2] or [P2&SD] in the main menu → [RECORDING SETUP] → [DUAL CODEC SETTING] → [REC MEDIA] and press the REC button to start
proxy recording at the same time as recording of the sources.
Push the <DISP/MODE CHK> switch towards the <CHK> side twice to display the proxy data recording information on the viewfinder and LCD monitor.
Recording to the SD memory card
To record the proxy data, use SD, SDHC, or SDXC memory cards with an indication of class2 or higher. Refer to our support desk at the following
website for the latest information not included in these operating instructions.
http://pro-av.panasonic.net/
When recording the proxy data to an SD memory card, always format the card using the camera.
Chapter 4 Shooting — Dual codec recording
Selects media for recording proxy data.
[P2]: Records proxy data to a P2 card.
[P2&SD]: Records proxy data to both of a P2 card and SD memory card.
[OFF]: Does not record proxy data.
f Factory setting: [OFF]
Sets the recording mode of proxy data.
[LOW 2CH MOV], [HQ 2CH MOV], [SHQ 2CH MOV], [AVC-G6 2CH MOV]
f Factory setting: [HQ 2CH MOV]
Selects whether to display proxy data recorded information or messages in the viewfinder and LCD
monitor.
[ON]: Displays proxy recording information and SD memory card remaining capacity at the start of
recording. Warning information is displayed at all times.
[OFF]: Displays proxy and SD memory card warning information for only three seconds when warning
occurs.
f Factory setting: [OFF]
Resolution
1920×1080
960×540
640×360
480×270
Baseline Profile
Codec
Number of channels
AAC-LC
LPCM
AAC-LC
AAC-LC
– 78 –
Description of settings
Codec
Frame rate
H.264
60 fps/50 fps
High Profile
H.264
30 fps/25 fps
High Profile
H.264
30 fps/25 fps
High Profile
H.264
30 fps/25 fps
Bitrate per channel
2ch
64 kbps
2ch
768 bps
2ch
64 kbps
2ch
64 kbps
Bitrate
6 Mbps
3500 kbps
1500 kbps
800 kbps
Sampling frequency
48 kHz
48 kHz
48 kHz
48 kHz
Advertisement
Table of Contents
