Table of Contents
Advertisement
Convenient shooting functions
Low angle shooting
When shooting at low angles, releasing the hold cover on the REC button on the handle from the <HOLD> position will allow shooting with the REC
button on the handle.
f To prevent accidental operation of the REC button on the handle when it is not in use, keep the hold cover to the <HOLD> position.
Scan reverse shooting
Set [ON] in the main menu → [SYSTEM MODE] → [SCAN REVERSE] to display and record the image in vertically or horizontally reverse.
Zebra patterns display
The camera can display two types of zebra patterns.
Press the <ZEBRA> button displays the zebra pattern that is set in the menu.
Zebra patterns can also be displayed in the video of the monitor output terminal (<SDI OUT>, <GENLOCK IN/VIDEO OUT>, <HDMI OUT>) according
to settings.
The level for zebra pattern display can be set in the main menu → [DISPLAY SETUP].
Item
[ZEBRA1 DETECT]
[ZEBRA2 DETECT]
[ZEBRA2]
[SPOT]: The image level from the setting value of [ZEBRA1 DETECT] to the setting value of [ZEBRA2 DETECT] is displayed in the zebra pattern.
To display the zebra patterns in the video of the monitor output terminal (<SDI OUT>, <GENLOCK IN/VIDEO OUT>, <HDMI OUT>), set in the main
menu → [OUTPUT SEL] → [VIDEO OUT ZEBRA].
Displaying the center marker
Displays when setting an item other than [OFF] in the main menu → [DISPLAY SETUP] → [CENTER MARK].
@
NOTE
t The center marker display is not displayed in the images of terminals <SDI OUT>, <GENLOCK IN/VIDEO OUT>, and <HDMI OUT>.
Displaying the safety zone marker
The items you select the main menu → [DISPLAY SETUP] → [SAFETY MARK] are displayed.
The size of the safety zone marker can be changed in the main menu → [DISPLAY SETUP] → [SAFETY AREA].
Chapter 4 Shooting — Convenient shooting functions
Sets the extraction level of zebra pattern 1.
[0%]...[109%]
f Factory setting: [70%]
Sets the extraction level of zebra pattern 2.
[0%]...[109%]
f Factory setting: [85%]
Sets on/off of zebra pattern 2 and selects the type.
[ON], [SPOT], [OFF]
f Factory setting: [SPOT]
Image level
[ON]
[109%]
[ZEBRA2 DETECT]
[ZEBRA1 DETECT]
[0%]
Description of settings
[ZEBRA2]
[OFF]
[SPOT]
– 70 –
Advertisement
Table of Contents
