Table of Contents
Advertisement
Item
[INPUT1 LINE LEVEL]
[INPUT2 LINE LEVEL]
[RECORDING CH
[FRONT VR SELECT]
SETTING]
[AUTO LEVEL CH3]
[AUTO LEVEL CH4]
[LEVEL CONTROL CH3] Can be manually adjusted with this item when automatic level adjustment of audio channel 3 is [OFF].
[LEVEL CONTROL CH4] Can be manually adjusted with this item when automatic level adjustment of audio channel 4 is [OFF].
[MIC LOWCUT CH1]
[MIC LOWCUT CH2]
[MIC LOWCUT CH3]
[MIC LOWCUT CH4]
[LIMITER CH1]
[LIMITER CH2]
[LIMITER CH3]
[LIMITER CH4]
[HEADROOM]
[OUTPUT SETTING]
[AUDIO OUT]
[TEST TONE]
[OUTPUT SEL]
Configure the settings regarding video output from <SDI OUT>, <HDMI OUT>, <GENLOCK IN/VIDEO OUT>, or <TC IN/OUT> terminal.
Item
[SDI OUT]
Chapter 6 Menu Operations — Menu list
Sets the level of an external line input to be connected to the <AUDIO INPUT 1> terminal. Enabled only for
externally connected devices.
[4dB], [0dB]
f Factory setting: [0dB]
Sets the level of an external line input to be connected to the <AUDIO INPUT 2> terminal. Enabled only for
externally connected devices.
[4dB], [0dB]
f Factory setting: [0dB]
Sets the allocation to the <F.AUDIO LEVEL> dial. Enabled when the setting is other than <AUTO>.
[0dB] to [−c] can be adjusted.
[CH1], [CH2], [CH3], [CH4], [CH1/CH2], [CH3/CH4][ALL], [OFF]
f Factory setting: [OFF]
Selects the level setting method for audio channel 3.
[ON]: Sets the mode to adjust automatically. The limiter does not work.
[OFF]: The audio level follows the value for [LEVEL CONTROL CH3].
f Factory setting: [ON]
Selects the level setting method for audio channel 4.
[ON]: Sets the mode to adjust automatically. The limiter does not work.
[OFF]: The audio level follows the value for [LEVEL CONTROL CH4].
f Factory setting: [ON]
[0]...[100]
f Factory setting: [70]
[0]...[100]
f Factory setting: [70]
Enables/disables the lowcut filter for audio channel 1.
[ON], [OFF]
f Factory setting: [OFF]
Enables/disables the lowcut filter for audio channel 2.
[ON], [OFF]
f Factory setting: [OFF]
Enables/disables the lowcut filter for audio channel 3.
[ON], [OFF]
f Factory setting: [OFF]
Enables/disables the lowcut filter for audio channel 4.
[ON], [OFF]
f Factory setting: [OFF]
Enables/disables the limiter for audio channel 1.
[ON], [OFF]
f Factory setting: [OFF]
Enables/disables the limiter for audio channel 2.
[ON], [OFF]
f Factory setting: [OFF]
Enables/disables the limiter for audio channel 3.
[ON], [OFF]
f Factory setting: [OFF]
Enables/disables the limiter for audio channel 4.
[ON], [OFF]
f Factory setting: [OFF]
Sets the headroom (standard level).
[12dB], [18dB], [20dB]
Sets the audio signal output from the <AUDIO OUT> terminal, headphone terminal, <HDMI OUT>terminal,
and built-in speaker.
[CH1/CH2], [CH1], [CH2], [CH3/CH4], [CH3], [CH4]
f Factory setting: [CH1/CH2]
Outputs rated level 1 kHz tone signal according to the reference level.
The standard level varies depending on the setting of [HEADROOM].
[ON], [OFF]
f Factory setting: [ON]
Selects video output from the <SDI OUT> terminal.
[ON]: Outputs video.
[OFF]: Does not output video.
f Factory setting: [OFF]
– 131 –
Description of settings
Description of settings
Advertisement
Table of Contents
