Table of Contents
Advertisement
Item
[KNEE MASTER
SLOPE]
[KNEE MASTER SLOPE
Rch]
[KNEE MASTER SLOPE
Bch]
[HI-COLOR SW]
[HI-COLOR LVL]
[WHITE CLIP SETTING]
[WHITE CLIP]
[WHITE CLIP LVL]
[Rch CLIP LVL]
[Bch CLIP LVL]
[DRS]
[DRS EFFECT DEPTH]
[A.IRIS LEVEL]
[A.IRIS LEVEL EFFECT]
[SYSTEM MODE]
Configure the settings regarding the recording format of video and audio.
Item
[LINE&FREQ]
[REC FORMAT]
[CAMERA MODE]
[AUDIO SMPL RES]
[ASPECT CONV]
[SCAN REVERSE]
[SETUP]
Chapter 6 Menu Operations — Menu list
Sets the knee inclination.
[0]...[99]
f Factory setting: [85]
Sets the knee inclination of Rch.
[−31]...[31]
f Factory setting: [0]
Sets the knee inclination of Bch.
[−31]...[31]
f Factory setting: [0]
Turns the mode that expands the color dynamic range [ON]/[OFF].
[ON], [OFF]
f Factory setting: [ON]
Selects the level of the mode that expands the color dynamic range.
[1]...[32]
f Factory setting: [32]
Turns the white clip function [ON]/[OFF]. This enables the [WHITE CLIP LVL] setting value when the
function is [ON].
[ON], [OFF]
f Factory setting: [ON]
Sets the white clip level.
[90%]...[109%]
f Factory setting: [109%]
Sets the clip level Rch for the white clips.
[−31]...[31]
f Factory setting: [0]
Sets the clip level Bch for the white clips.
[−31]...[31]
f Factory setting: [0]
Enables/disables the dynamic range stretcher function.
[ON], [OFF]
f Factory setting: [OFF]
If functions are assigned to the USER buttons, switches [ON]/[OFF] using the USER button operations.
Sets the compression level of the high-brightness areas of the dynamic range stretcher function. By
compressing the video signal levels of the high-brightness areas that are blown out in normal shooting, the
dynamic range can be expanded.
[1], [2], [3]
f Factory setting: [1]
Enables/disables the auto iris level function.
[ON], [OFF]
f Factory setting: [ON]
If functions are assigned to the USER buttons, switches [ON]/[OFF] using the USER button operations.
Adjusts the brightness in the auto iris mode. Increase the value to brighten, and decrease the value to
darken the convergence of auto iris.
[−50]...[50]
f Factory setting: [0]
Sets the signal format of the camera. If this setting has been changed, select [YES] on a confirmation
message and restart the camera.
[1080-59.94P], [1080-50P], [1080-59.94i], [1080-50i], [720-59.94P], [720-50P], [480-59.94i], [576-50i]
Selects the codec for recording and the mode for shooting and recording.
[AVC-I100/60P], [AVC-I100/60i], [AVC-I100/50P], [AVC-I100/50i], [AVC-I100/30PN], [AVC-I100/24PN],
[AVC-I100/25PN], [AVC-I50/60P], [AVC-I50/60i], [AVC-I50/50P], [AVC-I50/50i], [AVC-G50/60P],
[AVC-G50/60i], [AVC-G50/50P], [AVC-G50/50i], [AVC-G25/60P], [AVC-G25/60i], [AVC-G25/50P],
[AVC-G25/50i], [AVC-G12/60P], [AVC-G12/60i], [AVC-G12/50P], [AVC-G12/50i], [DVCPRO HD/60P],
[DVCPRO HD/60i], [DVCPRO HD/50P], [DVCPRO HD/50i], [DVCPRO50/60i], [DVCPRO50/50i],
[DVCPRO/60i], [DVCPRO/50i], [DV/60i], [DV/50i]
Sets the camera shooting mode when using the 1080i [DVCPRO HD] codec and in SD mode.
[60i], [50i], [30P], [25P]
Selects the number of audio bits ([24BIT] or [16BIT]) when [REC FORMAT] is [AVC-I100] or [AVC-I50].
At [REC FORMAT] other than these, recording is performed at the number of audio bits fixed to 24 bits or
16 bits.
[16BIT], [24BIT]
Selects the aspect ratio of the video to be recorded in 480i, 576i.
[SIDE CROP], [LETTER BOX], [SQUEEZE]
f Factory setting: [SIDE CROP]
Enables/disables the scan reverse shooting function for vertical/horizontal inversion of images.
[ON], [OFF]
f Factory setting: [OFF]
Sets the setup level of 480i video signals.
[0%], [7.5%A]
– 123 –
Description of settings
Description of settings
Advertisement
Table of Contents
