Table of Contents
Advertisement
Item
[A.IRIS SPEED]
[A.IRIS WINDOW]
[AREA MODE]
[WFM MODE]
[ZEBRA]
[ZEBRA MODE]
[BARS TYPE]
[FRONT REC]
[AUTO SW]
Configure the settings regarding the auto mode.
Auto iris, auto gain control, auto tracking white balance, and auto focus functions can be set separately.
These menu items cannot be set when the thumbnail screen is displayed.
Item
[A.IRIS]
[AGC]
[AGC LIMIT]
[AGC POINT]
[A.SHUTTER]
[A.SHUTTER LIMIT]
[A.SHUTTER POINT]
Chapter 6 Menu Operations — Menu list
Sets the control speed of the auto iris function.
[FAST], [NORMAL], [SLOW]
f Factory setting: [NORMAL]
Selects the auto iris detection window.
[NORM1]: Window that is near screen center.
[NORM2]: Window that is near screen bottom.
[CENTER]: Window that is a spot in the screen center.
f Factory setting: [NORM1]
Assigns the function to be performed within the area selected using the control stick during shooting.
[INHIBIT]: Does not allocate a function.
[FOCUS]: Auto focus/focus bar function
[IRIS]: Auto iris function
[Y GET]: Brightness display function
[FOCUS/IRIS]: Activates [FOCUS] and [IRIS] simultaneously.
[FOCUS/Y GET]: Activates [FOCUS] and [Y GET] simultaneously.
f Factory setting: [INHIBIT]
Selects the type of waveform to be displayed on the LCD monitor when the <WFM> button is pressed.
[WAVE]: Displays as a waveform.
[VECTOR]: Displays as a vector.
[WAVE/VECT]: Each time the <WFM> button is pressed, the display changes in order from (no display) →
[WAVE] (waveform) → [VECTOR] (vector) → (no display).
f Factory setting: [WAVE]
Displays/hides zebra patterns.
[ON]: Displays zebra patterns.
[OFF]: Does not display zebra patterns.
f Factory setting: [OFF]
If functions are assigned to the USER buttons, switches [ON]/[OFF] using the USER button operations.
Selects whether to keep displaying zebra patterns.
[CONTINUE]: Keep the display of zebra patterns.
[MOMENT]: Displays zebra patterns for approximately five seconds.
f Factory setting: [MOMENT]
Selects the color bar to use.
[SMPTE]: Uses the color bar in the SMPTE standard.
[FULL BARS]: Uses full color bars.
[SPLIT]: Uses SPLIT color bars for SNG (Satellite News Gathering).
[ARIB]: Uses ARIB standard color bars.
f Factory setting: [SMPTE]
Sets operation of the REC button on the front of the camera.
[INHIBIT]: Does not activate the operation.
[ACTIVE]: Activates the operation.
f Factory setting: [ACTIVE]
Enables/disables the auto iris control.
[ON]: Performs the auto iris control operation when in auto mode. The <IRIS> button does not work.
[OFF]: Does not perform the auto iris control operation when in auto mode. Activates the iris control
selected with the <IRIS> button.
f Factory setting: [ON]
Sets the auto gain control operations when [ON] is selected in [A.IRIS].
[ON]: Performs the operation of the [AGC] function that automatically adjusts camera gain when in auto
mode.
[OFF]: Does not perform the operation of the [AGC] function that automatically adjusts camera gain when
in auto mode.
f Factory setting: [ON]
Sets the maximum gain value during [AGC] operation.
[3dB], [6dB], [12dB], [18dB]
f Factory setting: [6dB]
Sets the F value to switch control to [AGC] from auto iris during [AGC] operation.
[F4.0], [F5.6]
f Factory setting: [F4.0]
Sets the auto shutter control operations when [ON] is selected in [A.IRIS].
[ON]: Performs the operation of auto shutter when in auto mode.
[OFF]: Does not perform the operation of auto shutter when in auto mode.
f Factory setting: [ON]
Sets the maximum shutter value during [A.SHUTTER] operation.
[1/100], [1/120], [1/250]
f Factory setting: [1/250]
Sets the F value to switch control from auto iris to [A.SHUTTER] during [A.SHUTTER] operation.
[F8.0], [F9.6]
f Factory setting: [F8.0]
– 126 –
Description of settings
Description of settings
Advertisement
Table of Contents
