Preparing For Connection; For Wireless Lan - Panasonic AJ-PX270EJ Operating Instructions Manual

Preparing for connection

For wireless LAN

Connect the wireless module AJ-WM30 (optional) to the camera. The grip belt can be removed.
1
Press the <OPEN> button and remove the cover by sliding it in the direction of the arrow. (Fig. 1)
2
Connect the wireless module to the <USB2.0 HOST> terminal. (Fig. 2)
Insert it all the way.
3
Slide the removed cover to close it.
@ NOTE
t When removing the wireless module, pull it down straight.
Storing the wireless module
The removed wireless module can be stored in the grip belt.
Cautions when using wireless module
Read the operating manual of the wireless module thoroughly and understand it before using.
To prevent accidental operation, there are restrictions as follows:
f Supported standard: IEEE802.11g/n
IEEE802.11a and IEEE802.11b cannot be used.
f Communication frequency: 2412 MHz to 2462 MHz (1ch, 6ch, 11ch)
12ch and higher cannot be used.
r For use overseas
The following four types of products are available to comply with laws regarding radio wave of every region in the world. The products can be used only
in the country or region where they are supported.
f AJ-WM30MC
People's Republic of China
f AJ-WM30P
United States of America, Canada, Mexico, Argentina, Peru, Taiwan
f AJ-WM30E
EU member nations, EFTA member nations, Australia, New Zealand, Russia, Ukraine, Saudi Arabia, UAE, Kuwait, Oman, Egypt, Republic of South
Africa, Korea, Philippines, Malaysia, Singapore
f AJ-WM30
Japan
@ NOTE
t In France, using outdoors is prohibited.
Chapter 9 Network Connection — Preparing for connection
<OPEN> button
Fig. 1
– 161 –
<USB2.0 HOST> terminal
Fig. 2