Table of Contents
Advertisement
Item
[DEL LAST CLIP]
Assigns the function to delete the clip shot immediately beforehand.
[SLOT SEL]
Assigns the function for switching the card to record when two or more cards are inserted in the microP2 memory card slot.
Assigns the function to select the recording target slot between the P2 memory card slot and microP2 memory card slot. This setting is
[REC MEDIA]
linked to the setting value in the main menu → [RECORDING SETUP] → [REC MEDIA].
[AUDIO MON SEL]
Assigns the function that switches between the display of the audio level meter and the audio channel ([CH1]/[CH2] and [CH3]/[CH4]) of
output audio (headphones, built-in speaker, <AUDIO OUT> terminal, and <HDMI OUT> terminal) while the button is held down.
[REC CHECK]
Assigns the recording check function.
[USB MODE]
Assigns the function for switching the USB device mode or USB host mode to enabled/disabled.
@
NOTE
t The following functions are also turned off when the camera is turned off.
[WFM]/[D.ZOOM]/[FBC]/[S.GAIN]/[ATW]/[ATW LOCK]/[SPOTLIGHT]/[BACKLIGHT]/[BLACKFADE]/[WHITEFADE]/[Y GET]/[FOCUS ASSIST]/[FAST
ZOOM]/[EVF ON/OFF]/[AUDIO MON SEL]/[USB MODE]
t When [FAST ZOOM] is enabled, the zoom sound becomes louder than usual.
Chapter 3 Preparation — Assigning functions to the USER buttons
Description
– 38 –
Advertisement
Table of Contents
