Upc-A; Restore Factory Defaults; Enable/Disable Upc-A; Transmit Check Digit - Newland NLS-HR3290 User Manual

UPC-A

Restore Factory Defaults

Enable/Disable UPC-A

** Enable UPC-A
If the scanner fails to identify UPC-A barcodes, you may first try this solution by scanning
the Enter Setup barcode and then Enable UPC-A barcode.

Transmit Check Digit

UPC-A is 12 digits in length with the last one as its check digit used to verify the integrity of the data.
** Transmit UPC-A Check Digit
77
Restore the Factory Defaults of UPC-A
Disable UPC-A
Do Not Transmit UPC-A Check Digit
Enter Setup
** Exit Setup