Newland NLS-HR3290 User Manual page 171

Enter Setup
F5 Example: Move the cursor forward and send the data
Move the cursor forward 3 characters, then send the rest of the barcode data from the barcode above.
End with a carriage return.
Command string: F503F10D
F5 is the "Move the cursor forward a number of characters" command
03 is the number of characters to move the cursor
F1 is the "Send all characters" command
0D is the hex value for a CR
The data is output as: 4567890ABCDEFGHIJ
<CR>
F6 Move the cursor backward a number of characters
Syntax=F6nn (nn: The numeric value (00-99) for the number of characters the cursor should be moved
back)
Move the cursor back "nn" characters from current cursor position.
F7 Move the cursor to the beginning
Syntax＝F7
Move the cursor to the first character in the input message.
EA Move the cursor to the end
Syntax＝EA
Move the cursor to the last character in the input message.
159 ** Exit Setup