Newland NLS-HR3290 User Manual page 158

Enter Setup
To set a terminating character suffix, scan the Set Terminating Character Suffix barcode and the
numeric barcodes representing the hexadecimal value of a desired terminating character and then scan
the Save barcode. Refer to the ASCII Table in Appendix for hexadecimal values of terminating
characters.
Note: A terminating character suffix cannot exceed 2 characters.
** Exit Setup
Set Terminating Character Suffix
Set the terminating character suffix to 0x0A:
1. Scan the Enter Setup barcode.
2. Scan the Set Terminating Character Suffix barcode.
3. Scan the numeric barcodes "0" and "A". (See the Digit Barcodes in
Appendix)
4. Scan the Save barcode. (See the Save/Cancel Barcodes in Appendix)
5. Scan the Exit Setup barcode.
146