AIM ID Prefix
AIM (Automatic Identification Manufacturers) ID defines symbology identifier (For the details, see the AIM
ID Table in Appendix). If AIM ID prefix is enabled, the scanner will add the symbology identifier before
the scanned data after decoding.
** Disable AIM ID Prefix
Code ID Prefix
Code ID can also be used to identify barcode type. Unlike AIM ID, Code ID is user programmable. Code
ID can only consist of one or two English letters.
** Disable Code ID Prefix
139
AIM ID is not user programmable.
Enter Setup
Enable AIM ID Prefix
Enable Code ID Prefix
** Exit Setup