Upc-E; Restore Factory Defaults; Enable/Disable Upc-E; Transmit Check Digit - Newland NLS-HR3290 User Manual

UPC-E

Restore Factory Defaults

Enable/Disable UPC-E

** Enable UPC-E

Transmit Check Digit

UPC-E is 8 digits in length with the last one as its check digit used to verify the integrity of the data.
** Transmit UPC-E Check Digit
73
** Restore the Factory Defaults of UPC-E
If the scanner fails to identify UPC-E barcodes, you may first try this solution by
scanning the Enter Setup barcode and then Enable UPC-E barcode.
Disable UPC-E
Do Not Transmit UPC-E Check Digit
Enter Setup
** Exit Setup