Table of Contents
Advertisement
Enter Setup
Check Digit Verification
Check digits are optional for MSI-Plessey and can be added as the last one or two digits, which are
calculated values used to verify the integrity of the data.
If the Disable option is enabled, the scanner transmits MSI-Plessey barcodes as is.
Disable
** One Check Digit, MOD10
Two Check Digits, MOD10/MOD10
If you select a check digit algorithm and the Do Not Transmit Check Digit option,
MSI-Plessey barcodes with a length that is less than the configured minimum length
after having the check digit(s) excluded will not be decoded. (For example, when the
One Check Digit, MOD11 and Do Not Transmit Check Digit options are enabled
and the minimum length is set to 4, MSI-Plessey barcodes with a total length of 4
characters including the check digit cannot be read.)
** Exit Setup
Two Check Digits, MOD10/MOD11
** Do Not Transmit Check Digit
Transmit Check Digit
126
Hide quick links:
Advertisement
Table of Contents
