Newland NLS-HR3290 User Manual page 162

Enter Setup
Step 8: Enter formatter command
Refer to the Formatter Command Type 6 in this chapter. Scan the alphanumeric barcodes that
represent the command you need to edit data. For example, when a command is F141, you should scan
F141. A command can contain up to 112 characters.
Step 9: Scan the Save barcode from the Save/Cancel Barcodes in Appendix to save your data format.
Example: Program format_0 using formatter command type 6, Code 128 containing 10 characters
applicable, send all characters followed by "A".
1. Scan the Enter Setup barcode
2. Scan the Add Data Format barcode
3. Scan the 0 barcode
4. Scan the 6 barcode
5. Scan the 9 barcode three times
6. Scan the barcodes 002
7. Scan the barcodes 0010
8. Scan the alphanumeric barcodes F141
9. Scan the Save barcode
** Exit Setup
Enter the Setup mode
Add a data format
Select format_0
Select formatter command type 6
All interface types applicable
Only Code 128 applicable
Only a length of 10 characters applicable
Send all characters followed by "A" (hex: 41)
Save the data format
150