Recommended Cleaning; Programming Software - Crestron Isys TPS-4000L Operation Manual

®
Crestron Isys TPS-4000L

Programming Software

Operations Guide – DOC. 6301

Recommended Cleaning

Keep the surface of the touchscreen free of dirt, dust, or other materials that could
degrade optical properties. Long-term contact with abrasive materials can scratch the
surface, which may detrimentally affect image quality.
For best cleaning results, use a clean, damp, non-abrasive cloth with any
commercially available non-ammonia glass cleaner. The faceplate may not provide a
complete watertight seal. Therefore, apply cleaning solution to the cloth rather than
the surface of the touchscreen. Wipe touchscreen clean and avoid ingress of moisture
beneath panels.
Have a question or comment about Crestron software?
Answers to frequently asked questions (FAQs) can be viewed in the Online Help
section of the Crestron website (www.crestron.com). Go to
http://support.crestron.com
submitted to Crestron's True Blue Support. First-time users will need to establish a
user account.
Setup and configuration of distributed audio and QuickMedia™ systems is easy
thanks to Crestron's Windows
SystemBuilder™ (SystemBuilder) creates a complete project, with no special
programming required. Crestron SystemBuilder completes all necessary
programming for a base system including all touchpanel screens and the control
system program. Once Crestron SystemBuilder creates the project, the system
interfaces and program logic can be customized with other Crestron development
tools such as SIMPL Windows and Crestron VisionTools Pro-e (VT Pro-e).
The program output of Crestron SystemBuilder is a SIMPL Windows program with
much of the functionality encapsulated in macros. Therefore, extending the
capabilities of the system is very easy. Crestron SystemBuilder and SIMPL
Windows are intended for users with different levels of programming knowledge.
Crestron SystemBuilder is easier to use for the beginning programmer, and much
faster for all programmers. However, it does not allow the degree of control and
flexibility that SIMPL Windows does. Of course, one can initiate programming using
the easiest method (Crestron SystemBuilder) and use advanced techniques that are
available from SIMPL Windows to customize the job.
Crestron SystemBuilder comes with templates for all supported interfaces. If a user
wishes to create a touchpanel project using templates with a different look-and-feel
this can be accomplished by making a custom template. This custom template can
then be used by Crestron SystemBuilder to create the final project files to be loaded
into the panels. Alternatively, VT Pro-e can be used to tweak projects created with
Crestron SystemBuilder or develop original touchpanel screen designs.
For lighting and home automation applications using the TPS-4000L, Crestron
recommends using D3 Pro™ Lighting and Automation System software. D3 Pro has
similar functionality to SystemBuilder, but is optimized for programming lighting
and home automation systems.
10.4 Inch Lectern/Wall Mount Touchpanel: Crestron Isys® TPS-4000L • 21
10.4" Lectern/Wall Mount Touchpanel
to post your own question or view questions you have

-based programming software. Crestron