Firmware Upgrade - Crestron Isys TPS-4000L Operation Manual

10.4" Lectern/Wall Mount Touchpanel
A firmware upgrade file has the
extension .csf.
40 • 10.4 Inch Lectern/Wall Mount Touchpanel: Crestron Isys® TPS-4000L

Firmware Upgrade

To take advantage of all the TPS-4000L features, it is important that the unit contains
the latest firmware available. Therefore, please check the Crestron website
(http://www.crestron.com/downloads/software_updates.asp) for the latest version of
firmware. Not every product has a firmware upgrade, but as Crestron improves
functions, adds new features, and extends the capabilities of its products, firmware
upgrades are posted. To upgrade the firmware, complete the following steps.
NOTE: The following is the acceptable file extension for a firmware update file:
.csf TPS.V.XXXXX.csf (panel firmware)
1. Verify that the procedure for "Communication Settings" that begins on page
34 has been performed.
2. As shown after this step, select File Transfer | Update Touchpanel
Firmware from the Viewport menu.
File Transfer | Update Touchpanel Firmware Command
3. As shown after this step, select the Net ID of the TPS-4000L touchpanel
and then click OK. The "Open" window appears (refer to the subsequent
graphic).
"Select Network ID" Window
®
Crestron Isys TPS-4000L
Check Send Direct to Wired Touchpanel if
connected via RS-232 directly to
touchpanel.
Operations Guide – DOC. 6301