Crestron Isys TPS-4000L Operation Manual page 16

10.4" Lectern/Wall Mount Touchpanel
Video Screen
Select Input Screen
Video Adjustment Screen
12 • 10.4 Inch Lectern/Wall Mount Touchpanel: Crestron Isys® TPS-4000L
Video Menu
The TPS-4000L can display balanced and unbalanced composite video and S-video
input supporting both NTSC/PAL formats. Select the Video button from the SETUP
MENU to display the VIDEO screen, shown to the left.
The type of video source signal is specified by selecting Select Input. The
touchpanel can be configured to auto-detect S-video or composite video signals or
can be set to a specific signal type (S-video or composite) from a specific
connection. Select the appropriate input mode. Use either the TP Composite / BNC
Composite or TP S-Video / BNC S-Video buttons to manually control the mode.
TP or BNC on the selected button specifies the video input connector. TP
corresponds to the 6-position mini-terminal block connector (balanced video from a
Crestron Video Distribution Switch, Crestron Room Box, etc.) and BNC
corresponds to the dual 2-position mini-terminal block connectors (unbalanced video
from a VCR, DVD, etc.). Use the appropriate Auto Detect button for automatic
control. The text color of the selected button is red rather than black. Select the
desired mode, and select the Return button to return to the VIDEO screen.
The Show Controls button on the VIDEO screen offers another screen with access
to various parameters. Press a button to adjust the respective parameter. Each
parameter is detailed in the following table. After video parameters have been set,
select the Return button to return to the SETUP MENU.
Video Setup Details
VIDEO
SCREEN
1
BUTTONS
UP button increases video image brightness, DOWN button
Brightness
decreases video image brightness.
Contrast UP button increases video image contrast, DOWN button
decreases video image contrast.
Saturation UP button increases video image saturation, DOWN button
decreases video image saturation.
UP button increases video image hue, DOWN button
Hue
decreases video image hue.
Still/Motion The Motion setting eliminates the motion artifacts caused by
(toggle) the difference between first and second halves of a video
frame field. The Still setting yields a much sharper image,
however, motion artifacts may occur if fast moving objects are
displayed.
Hide This button returns the display to the VIDEO screen.
Controls
Default Restores the default settings. When prompted with "Are you
sure?" answer YES to restore the default settings. Answer NO
to return to the previous screen.
Return Returns to the SETUP MENU.
1. Video default is 50% for each of the video parameters (brightness, contrast, saturation, and hue).
2. Each screen has its own Return button to return to the SETUP MENU.
NOTE: A solid blue screen is displayed in the video window if the video signal is
not detected or is very weak. Verify that the video source is functioning and properly
connected. Balanced video cable runs should not exceed 500 feet (152.4 meters) and
unbalanced video cable runs should not exceed 100 feet (30.5 meters). Cable runs in
excess of these lengths will weaken the video signal.
®
Crestron Isys TPS-4000L
2
DESCRIPTION
Operations Guide – DOC. 6301