Crestron Isys TPS-4000L Operation Manual page 14

10.4" Lectern/Wall Mount Touchpanel
INTERFACE MENU
AUDIO MENU
10 • 10.4 Inch Lectern/Wall Mount Touchpanel: Crestron Isys® TPS-4000L
Interface Menu
The touchpanel communicates with a control system to activate commands or to
display feedback from components within the system. The communication interface
must be correctly specified or communication will not occur. To set communication
parameters select the Interface button located on the SETUP MENU and display the
INTERFACE MENU, shown to the left.
The Cresnet network identity number (CRESNET ID) is displayed on the
INTERFACE MENU. CRESNET ID is a two-digit hexadecimal number. The
hexadecimal number can range from 03 to FE and must correspond to the Net ID set
in the SIMPL Windows program of the Cresnet system. Matching IDs between the
touchpanel and SIMPL Windows program is required if data is to be successfully
transferred. The Net ID for the TPS-4000L is factory set to 03. No two devices in the
same system can have the same Net ID.
Two buttons adjacent to the hexadecimal display, UP and DOWN, increase and
decrease the CRESNET ID by one, respectively.
Select the Return button located on the INTERFACE MENU to accept the changes
and return to the SETUP MENU.
Audio Menu
Audio is a useful feedback tool and it can be used to enhance a custom interface. To
access the AUDIO MENU, shown to the left, press the Audio button from the
SETUP MENU. The AUDIO MENU offers a series of buttons, which opens
additional screens and is detailed in a table after this paragraph. Two of the buttons
on the AUDIO MENU perform a function directly. The Restore Default Settings
button returns all audio parameters to their default settings when the button is
selected. After audio parameters have been set, select the Return button to return to
the SETUP MENU.
Audio Setup Details
AUDIO AUDIO
MENU SETUP
1
BUTTON SCREEN
Master
Master 88%
Volume
WAV 88%
WAV
(On)
(continued on following page)
Crestron Isys
DESCRIPTION
The volume of all audio types (WAV, line, and key
click) is affected by the Master Volume control. If
the Master Volume control is set to 100%, the
volume for any type of audio is at maximum. If the
Master Volume is set to 0%, the value of all audio
types is overridden and the touchpanel is silent. If
Master Volume is a percentage (say 50%), then all
audio types can only achieve half of their
maximum value.
Enable WAV files with the WAV On button. WAV
Off disables this feature. Adjust the volume with
the UP and DOWN buttons. Select the Play WAV
File to sample and adjust the volume as a pre-
loaded WAV file plays.
Operations Guide – DOC. 6301
®
TPS-4000L
2