Crestron Isys TPS-4000L Operation Manual page 28

10.4" Lectern/Wall Mount Touchpanel
24 • 10.4 Inch Lectern/Wall Mount Touchpanel: Crestron Isys® TPS-4000L
C2Net-Device Slot in Configuration Manager
To incorporate the TPS-4000L touchpanel into the system, drag the TPS-4000 from
the Touchpanels | Touchpanels (Cresnet) folder of the Device Library and drop it in
the System Views. The PRO2 system tree displays the touchpanel in slot 9 with a
default Net ID of 03 as shown in the following illustration.
NOTE: The first touchpanel in a system is preset with a Net ID of 03, when its
symbol is dragged into the upper pane of System Views. Additional touchpanels are
assigned different Net ID numbers as they are added.
C2Net Device, Slot 9
Setting the Net ID in Device Settings
Double-click the TPS-4000 icon to open the "Device Settings" window. This
window displays the TPS-4000 device information. If necessary, select the Net ID
tab to change the Net ID, as shown in the following figure.
"Device Settings" Window for the TPS-4000
NOTE: SIMPL Windows automatically changes Net ID values of a device added to
a program if a duplicate device or a device with the same default Net ID already
exists in the program. Always ensure that the hardware and software settings of the
Net ID match. For Net ID hardware settings details, refer to "Identity Code" on page
8.
®
Crestron Isys TPS-4000L
Operations Guide – DOC. 6301