Recalling Jobs (Secure Print) - Oce cm6520 User Manual

9
– To change the printing conditions, skip to step 5.
4
To check the print results, select the job whose sample copy is to be printed from the job list, and then
press the [Proof Copy] key in the control panel.
– Check the print results on the printed pages.
5
Touch [Change Setting].
– If the job to be removed from the Release Held Job list is not displayed, touch [↑] or [↓] until the
desired job is displayed.
– If an incorrect job was selected, touch the button for the selected job again to deselect it.
The Change Settings screen appears.
6
Change the printing conditions on the Change Settings screen, and then touch [OK].
The Release Held Job screen appears again.
7
Touch [OK] or press the [Start] key in the control panel.
– To cancel printing the job, touch [Cancel].
The stored job is changed to an active job, then printed.

Recalling jobs (Secure Print)

"Secure Print" jobs are saved in "Secure Print User Box". To print a secured document, the ID and password
that were specified in the printer driver are required.
!
Detail
For details on using the keys in the control panel, refer to the User's Guide [Copy Operations].
For details on the box functions of this machine, refer to the User's Guide [Box Operations].
Note
Secured documents are automatically deleted after a set length of time after they are registered. The
default setting of this time is specified as 1 day, and the setting can be specified in the administrator
mode. For details, refer to "To specify the secure document selete time" on page 9-30.
A secure document that was printed can be deleted manually in the Administrator mode. For details,
refer to "To delete secure print documents" on page 9-29.
For details on specifying a setting for "Confidential Document Access Method", refer to the User's
Guide [Copy Operations].
9-38
Various settings
cm6520