I/F Timeout - Oce cm6520 User Manual

9

I/F Timeout

You can set the time until a communication timeout occurs for the USB or network interface. (Default setting:
60 sec.)
!
Detail
To display the Administrator Settings screen, refer to "To display the Administrator Settings screen" on
page 9-26.
1
In the Administrator Settings screen, touch [7 Printer Settings].
2
In the Printer Settings screen, touch the button of the desired interface setting.
3
Press the [C] (clear) key to erase the value, and then use the keypad to type in the default length of time
(between 10 and 1000 seconds).
– If a value outside of the allowable range is specified, the message "Input Error" appears. Type in a
value within the allowable range.
4
Touch [OK].
The time until a communication timeout occurs is set.
9-32
Various settings
cm6520