Print/Fax Output Setting - Oce cm6520 User Manual

Various settings
– For details on setting or changing the password, refer to the User's Guide [Copy Operations].
The Administrator Settings screen appears.
Note
To quit specifying the Utility mode settings, press the [Utility/Counter] key. Otherwise, cancel the Utility
mode by touching [Close] in each screen until the screen for the Copy, Fax/Scan, or Box mode appears.
To return to the Utility screen, touch [Close] until the desired screen appears. You can also touch the
menus in the left panel to return to the Utility screen.

Print/Fax Output Setting

You can specify whether to print data after it is received or to print it simultaneously as it is being received.
You can specify this function for the printer and for faxing. (Default settings: Printer - Page Print; Fax - Batch
Print)
Reminder
To display the Administrator Settings screen, refer to "To display the Administrator Settings screen" on
page 9-26.
1
In the Administrator Settings screen, touch [1 System Settings].
2
In the Systems Settings screen, touch [2 Output Settings].
3
In the Output Settings screen, touch [1 Print/Fax Output Settings].
– If the "Administrator Security Level" parameter is set to "Level 2", users can also specify this setting.
Touch [User Settings], [System Settings], [Output Settings], then [Print/Fax Output Settings] to
display the Print/Fax Output Settings screen.
– For details on the user access levels, refer to the User's Guide [Copy Operations].
The Print/Fax Output Settings screen appears.
cm6520
9
9-27